Home Company Info Product List Contact Details
Homeproduct Directory

Fire Equipment Fire fighting valve

Fire Equipment Fire fighting valve
company Fujian Mintai Fire-Fighting And Plumbing Equipment Co., Ltd
Categories Firefighting Equipment
Update2011-04-01
Original RegionChina
Fire Equipment Fire fighting valve
Title:Fire fighting valve
Model:SNW65-l-A-F
Features:Depending on the installation within the tooth structure is divided into two kinds of outer teeth.
Content:

fire valve , fire fighting valve , fire safety valve is a connector to fire water supply with the valve interface, used for factory, warehouse, high-rise buildings, public buildings and ship . normally installed in fire hydrant box, with fire hoses and water gun or wait for equipment supporting the fire extinguishment.

A fire hydrant (also known colloquially as a fire plug in the United States or as a johnny pump in New York City, because the firemen of the late 19th century were called Johnnies ), is an active fire protection measure, and a source of water provided in most urban, suburban and rural areas with municipal water service to enable firefighters to tap into the municipal water supply to assist in extinguishing a fire.

Operation

A hose is attached to the fire hydrant, then the valve is opened to provide a powerful flow of water, on the order of 350 kPa (50 lbf/in) (this pressure varies according to region and depends on various factors including the size and location of the attached water main). This hose can be further attached to a fire engine, which can then use a powerful pump to boost the water pressure and possibly split it into multiple streams. The hose may be connected with a threaded connection or a Storz connector. Care should be taken not to open or close a fire hydrant too quickly, as this can create a water hammer which can damage nearby pipes and equipment. The water inside a charged hoseline causes it to be very heavy and high water pressure causes it to be stiff and unable to make a tight turn while pressurized. When a fire hydrant is unobstructed, this is not a problem, as there is enough room to adequately position the hose.

Product Feature

Material: made of cast iron.

Inlet interface: 65 mm / 2.5 inch

Intake type: cylindrical pipe male thread

Intake Diameter: G2 1/2

Outlet type: cylindrical pipe male thread with duct buckle

Outlet Diameter: 65 mm / 2.5 inch

Rated working pressure: 1.6 Mpa

Height of valve opening: 23 mm

For water and foam mixed liquid only

Standard: certification: ISO9001 in accordance with GB3445 china national standard

Fire Equipment Fire fighting valve on sale

Products Showcase

See more products from this supplier.

Do you want to show products of your own company? Join FREE now!

You may also be interested in: